manbet体育
:DAIDISIKE戴迪斯科安宁光栅光幕传感器
发布时间:2019-05-16

  DAIDISIKE戴迪斯科安乐光栅光幕传感器 佛山市戴迪斯科光电科技有限公司是一家台湾和大陆配合出资组筑的合伙企业。工业安乐光电产物 ,是本公司服从欧洲程序自行研制,具有装配粗略、平静牢靠、反映乖巧的所长;防震抗滋扰技能强 ,悠久耐用的特征。该产物普通操纵于各类冲床、液压机、拉伸机、压模机、立式注塑机、制鞋机、橡胶机、临蓐装置线等,是工场安乐临蓐、裁减事项的好助手 。

产物先容:

光幕与把握器分散安排。DQA型对射式光幕是由发光器和受光器构成,或许有用检测出进入光幕区域的任何高出检测精度的不透后物体经历。合用于呆板压力机、液压机、油压机、折弯机以及其他伤害景象的安乐防护。DQA型对射式光幕可与DQCA/DQCA2型把握器配套运用或直接衔尾PLC以及安乐继电器,配合机床把握体例,竣工伤害境况时把握自愿停机的效力。

产物特征:

1.CPU自检效力:当安乐光幕回护器产生阻滞时,确保不向所把握的电器发送缺点信号

2.抗滋扰技能强

3.装配调试简单,配线粗略,外形好看

4.采用皮相贴装手艺,防震机能卓绝

5.响当令间短(≤20ms),安乐牢靠性高

6.服从欧洲程序安排,已通过CE认证

产物参数:

光幕阵势:对射式

光轴间距:10mm,14mm,20mm,25mm,30mm,40mm

检测精度:18mm,22mm,28mm,33mm,38mm,48mm

光束数:6、8...32,6、8...32,4、6...32,6、8...32,4、6...32,4、6...32

回护高度:光轴间距×(光束数-1)

检测间隔:30~3000mm、30~6000mm

响当令间:≤15ms

抗光滋扰:10000Lux(入射角≥5℃)

外形尺寸:36×36×Jmm(J为发光器/受光器长度)

防护品级:IP65

把握器:DQCA DQCA2

电源电压:DC(12-24V)AC(110-220V)继电器输出
消磨电压:200mA以下
输出 :NPN/PNP型,灌入电流500mA,压降1.5V以下,极性、短途、过载回护
输出形态:一齐光轴受光时ON(汲取显示绿灯)
指示灯 :投光器-电源指示灯(赤色) 受光器-输出指示灯(绿灯)遮光(赤色)
光源 :调制红外LED
衔尾方法:圆形插座,配专用连线电缆,投光器4芯, 受光器5芯
壳体原料:铝合金,两头ABS巩固尼龙

境遇参数:

耐境遇光:白炽光-受光面强度3000Lx;太阳光:受光面照度10000Lx
境遇温度:事务时-10至+40聂氏度(但不结冰) 保留时:-25至+55聂氏度

境遇湿度:事务时35至85%RH 保留时35至95%RH

Foshan disco Photoelectric Technology Co., Ltd. is a joint venture between Taiwan and mainland china. Industrial safety photoelectric product is our own development according to European standards. It has the advantages of simple installation, stability, reliability and quick response. It has the characteristics of strong shock resistance, anti-interference ability and durability. The products are widely used in all kinds of punching machine, hydraulic machine, drawing machine, molding machine, vertical injection molding machine, shoe machine, rubber machine, production line, factory production safety and reduce accidents assistant.

Product introduction:

The screen separation and controller design. DQA type of reflective screen is composed of a light emitting device and light receiving device which can effectively detect the screen into the region any more than the detection accuracy of opaque objects after. Applicable to mechanical press, hydraulic press, hydraulic press, bending machine and other dangerous occasions safety protection. DQA type of reflective screen with the DQCA/DQCA2 type controller matched or directly connected to the PLC and safety relay, with the machine control system, automatic stop control functions to achieve a dangerous situation.

Product features:

1.CPU self check function: when the safety protection device failure, ensure not to send the wrong signal to control appliances

2. strong anti-interference ability

3. 、 convenient installation and debugging, simple wiring and beautiful appearance

4. surface mount technology, shockproof performance is superior

5. short response time (less than 20ms), high safety and reliability

6., according to European standards design, has passed CE certification

Product parameter:

Screen form: on the radio

Optical axis spacing: 10mm, 14mm, 20mm, 25mm, 30mm, 40mm

Detection accuracy: 18mm, 22mm, 28mm, 33mm, 38mm, 48mm

Beam number: 6, 8, 32,6, 8, 32,4, 6, 32,6, 8, 32,4, 6, 32,4, 6... 32

Protection height: optical axis spacing * (beam number -1)

Detection distance: 30~3000mm, 30~6000mm

Response time: less than 15ms

Anti light interference: 10000Lux (incident angle less than 5 DEG C)

Size: 36 * 36 * Jmm (J is the length of the illuminator / receiver)

Protection level: IP65

Controller: DQCA DQCA2

Supply voltage: DC (12-24V) AC (110-220V) relay output

Consumption voltage: less than 200mA

Output: NPN/PNP, current 500mA, pressure drop below 1.5V, polarity, short circuit, overload protection

Output status: when all optical axis is light, ON (receive, display green light)

Indicator light: projector - power indicator light (red) light receiver - output indicator (green light) shading (red)

Light source: modulation infrared LED

Connection: round socket, with special wiring cable, projector 4 core, light receiver 5 core

Shell material: aluminum alloy, both ends ABS reinforced nylon

Environment parameter:

Resistance to ambient light: incandescent light intensity 3000Lx; sunlight: illumination 10000Lx

Working environment temperature: -10 to +40 Nieshi degree (but not freezing) save: -25 to +55 Nieshi degree

Ambient humidity: 35 to 85%RH during storage, 35 to 95%RH

上一篇::6ES7321-1FF10-0AA0
下一篇::8711-01加快率传感器
【返回列表页】

客服中心